تاثیر ذرات گرانول لاستیک بازیافتی بر روی ویژگی های ژئوتکنیکی خاک رس

نوع مقاله : مقاله پژوهشی

نویسندگان

گروه مهندسی عمران، دانشگاه آزاد اسلامی، واحد تبریز، تبریز

چکیده

بهسازی و تقویت خاک­های مساله­دار از نظر ویژگی­های ژئوتکنیکی نیازمند استفاده از مصالح مناسب است. بنابراین خرده­های لاستیک می­تواند بعنوان یک گزینه پیشنهادی جدید، در این خصوص مطرح شود. از سوی دیگر، امروزه دفع لاستیک­های فرسوده یکی از معضلات و مسائل اساسی از نظر محیط­زیست می­باشد. لذا در تحقیق حاضر به بررسی بهبود توانایی باربری خاک رس کائولن همراه با مخلوط ذرات زائد لاستیک­های فرسوده (باهدف کاهش آلاینده­های زیست­محیطی) بر اساس آزمون­های آزمایشگاهی پرداخته شده است. ذرات گرانول لاستیک بازیافتی در قطرهای 1 ،3 و 5 میلی­متر با درصدهای 5/2، 5، ، 5/7 و10 با خاک رس مخلوط شدند. جهت بررسی رفتار ژئوتکنیکی خاک رس تثبیت شده، آزمون­های تراکم، مقاومت فشاری تک­محوری، برش مستقیم و نفوذپذیری بر روی نمونه­ها انجام گرفت. نتایج بدست آمده از تحقیق حاضر نشان داد، میزان بهینه اندازه ذرات گرانول لاستیک و مقدار آن­ها در خـاک رس به تـرتیب برابر 1 میلی­متر و 5/2 درصد می­باشد. این مقادیر باعث کاهش قابل­توجه نسبت تخلخل حداقل در خاک رس تثبیت شده گردیده است. نتیجه آن، افزایش توانایی باربری، تراکم پذیری می­باشد. از سوی دیگر، افزودن ذرات گرانول لاستیک بازیافتی در تمامی ابعاد و درصدهای وزنی در خاک رس سبب افزایش میزان نفوذپذیری گردید. 

کلیدواژه‌ها


عنوان مقاله [English]

Effects of Waste Tire Granule Particles on Geotechnical Properties of Clay Soil

نویسندگان [English]

  • H. Bagheri
  • R. Dabiri
چکیده [English]

For improvement and stabilization of problematic soils in terms of geotechnical properties, it should be required to use proper materials. Therefore, tire chips is as new option can be suggested. On the other side, disposing of waste tire is one of the environmental problems. In present study, improving bearing capacity of kaolinite clay soil with using granule particle of tire waste (with aim of reducing environmental pollutants) based on laboratory tests have been investigated. Waste tire Granule particles in 1, 3 and 5 mm diameters and 2.5, 5, 7.5 and 10 percentage were mixed with clay. For evaluating geotechnical properties of stabilized clayey soil, compaction, uniaxial, direct shear and permeability tests were performed. Results of this study showed that, optimum of particle size and waste tire particle content are respectively 1 mm and 2.5 percentage (by weight). So that, in this values minimum void ratio significantly decreased in improved specimens. Consequently, bearing capacity and compressibility were growth. Also, with adding waste tire granule particle by a size larger than 1 mm and more 2.5 % content in improved soil, permeability went up.   

کلیدواژه‌ها [English]

  • Kaolinite clay soil
  • Waste tire granule
  • Environmental geotechnics
  • Improvement
  • Geotechnical properties
Asadzadeh, M. and Soltani Jigheh, H (2012) Swelling and Consolidation Properties of Clayey Soils Reinforced with Tire Chips, Journal of Civil Engineering, Ferdowsi University, 23 (2): 91-102. (In Persian)
ASTM D422-63 (1963) Standard Test Method for article-Size Analysis of Soils, Annual book of ASTM standards (reapproved 1998).
      ASTM D421-85 (1985) Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants, Annual book of ASTM standards, (reapproved 1998).
ASTM D 4318-95a (1995) Standard test method for liquid limit, plastic limit an plasticity index for soils, Annual book of ASTM standards.
ASTM-D 854-02 (2002) Standard test method for specific gravity of soil solids by water pycnometer, Annual book of ASTM standards.
ASTM-D 698-00 (2000) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)), Annual book of ASTM standards.
ASTM D2166-16 (2016) Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, Annual book of ASTM standards.
ASTM D3080-11 (2011) Standard Test Method for Direct Shear Test of Soils under Consolidated Drained Conditions, Annual book of ASTM standards.
ASTM D5084-03 (2003) Standard test method for measurement of hydraulic conductivity of saturated porous materials using flexible wall permeameter, Annual book of ASTM standards.
Ayothiraman, R. and Meena, A. K (2011) Improvement of Subgrade Soil with Shredded Waste Tyre Chips, Proceeding of Indian Geotechnical Conference, 1-4
Bosscher, P. J., Edil, T. B., and Kuraoka, S (1997) Design of highway embankments using tire chips, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4): 295-304.
Cetin, H., Fener, M. and Gunaydin, O (2006) Geotechnical properties of tire-cohesive clayey soil mixtures as a fill material", Engineering Geology, 88 (1–2):110-120.
Edil, T. and Bosscher, P (1994) Engineering properties of tire-chips and soil mixtures, Geotechnical Testing Journal, ASTM, 17(4):453-464.
Edil, T. B., Park, J. K. and Kim, Y. K (2004) Effectiveness of scrap tire chips as sportive drainage material, Journal of Environmental Engineering, ASCE, 130(7): 824-831.
Ersizad, A., Soltani Jigheh, H. and Asadzadeh, M (2015) Behavior of Clayey soils Mixed with Tire Chips, Journal of Civil Engineering, Ferdowsi University, 26(2): 117-130. (In Persian)
Iran China Clay Industries Company, Marand, East Azerbaijan, Iran. www.icckaolin.com.
Karamad Tabrizi, M., Abrishami, S. and Seyyedi Hosseini Nia, E (2015) Effects of Granules Tire on Clay Dry unit weight, 2nd National conference in Soil Mechanics and Foundation Engineering, Qom University of Technology, 1-9. (In Persian).
Lee, J. H., Salgado, R., Bernal, A., and Lovell, C. W (1999) Shredded tires and rubber–sand as lightweight backfill, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125:132-141.
Poh, P. S. H., and Broms, B. B (1995) Slope stabilization using oldrubber tires and geotextiles, Journal of Performance of Constructed Facilities, ASCE, 9(1): 76–80.
Rahgozar, M. A. and Saberian, M (2016) Geotechnical Properties of Peat Soil Stabilized with Shredded Waste Tire Chips, Mires and Peat, 18: 1-12.
Ratnam, A. V., Prasad, D. S. V., Prasada R., G. V. R. and Ratna, P. S (2016) Influence of Waste Tyre Rubber Chips on Strength and Settlements of Soils, International Journal of Engineering Innovation and Researches, 5(4): 282-287. 
Singh, J. and Sonthwal, K. V (2017) Improvement of Engineering Properties of Clayey Soil using Shredded Rubber Tube, International Journal of Theoretical and applied Sciences, 9(1): 1-6.
Solanki, D., Dave M. and Purohit D. G. M (2017) Stabilization of Clay Soil Mixed with Rubber Tyre Chips for Design in Road Construction, International Journal of Engineering Science Invention, 6(9): 2319-6734.
Vadi, P. K., Ganga, D., Priyadarsini, P. S. and Naga Bharath, Ch (2015) Experimental Investigation on California Bearing Ratio for Mechanically Stabilized Expansive Soil using Waste Rubber Tyre Chips, International Journal of Civil Engineering and Technology, 6(11): 97-110.
Warith, M. A., and Sudhakar, M. R (2006) Predicting the compressibility behaviour of tire shred samples for landfill applications, Waste Management, 26: 268-276.
Wu, W. Y., Benda, C. C. and Cauley, R. F (1997) Triaxial determination of shear strength of tire chips, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(5): 479-482.
Yang, S., Lohnes, R. A. and Kjartanson, B. H (2002) Mechanical properties of shredded tires, Geotechnical Testing Journal, ASTM, 25(1): 44-52.
Youwai, S. and Bergado, D. T (2004) Numerical analysis of reinforced wall using rubber tire chips-sand mixtures as backfill material, Computers and Geotechnics, 31(2): 103-114.
Zareh Sh., M (2011) Strategic Analysis in Tire Industry of Iran, Iran Rubber Magazine, 26:6-15. (In Persian).