@article { author = {Jamshidi, Amin}, title = {Influence of density and porosity on the estimation accuracy of uniaxial compressive strength and elasticity modules from Schmidt rebound number for limestones}, journal = {New Findings in Applied Geology}, volume = {12}, number = {24}, pages = {65-76}, year = {2018}, publisher = {Bu-Ali Sina University}, issn = {2228-5873}, eissn = {2981-0264}, doi = {10.22084/nfag.2018.15464.1290}, abstract = {In the present study, the effect of density (ρ) and porosity (n) on the accuracy of correlation between uniaxial compressive strength (UCS) and modulus of elasticity (E) with Schmidt rebound hardness (HR) was investigated. For this purpose, 15 different limestones were selected and their physical (ρ, n) and mechanical (UCS, E, HR) properties were determined. In the following, simple and multivariable regression analyses based on the HR, ρ and n for estimating the UCS and E were proposed. The relationships proposed based on the statistical tests have been investigated, which indicates their appropriate accuracy. Comparison of simple and multivariate relationships shows that ρ, n play an important role in increasing the estimation accuracy of UCS and E from HR. Moreover, the results shows that when HR and ρ be used as the input parameter in the regression analysis, the value of the determination coefficient for estimating the UCS and E are 0.88 and 0.83, respectively. If HR and n be used as input parameters, the value of the determination coefficients for estimating the UCS and E are 0.91 and 0.74, respectively.}, keywords = {porosity,Density,Uniaxial compressive strength,Modulus of elasticity,Schmidt hardness rebound}, title_fa = {تأثیر چگالی و تخلخل بر میزان دقت روابط تخمین مقاومت فشاری تک‌محوری و مدول الاستیسیته سنگ‌آهک از سختی واجهشی اشمیت}, abstract_fa = {در تحقیق حاضر، تاثیر چگالی و تخلخل بر میزان دقت روابط تخمین مقاومت فشاری تک­محوری و مدول­الاستیسیته از سختی واجهشی اشمیت بررسی شده است. برای رسیدن به این اهداف، 15 نمونه سنگ­آهک تهیه و ویژگی­های فیزیکی (چگالی و تخلخل) و مکانیکی (مقاومت فشاری تک­محوری، مدول الاستیسیته و سختی واجهشی اشمیت) آن­ها تعیین شده است. در ادامه آنالیزهای رگرسیونی ساده و چند متغیره بر اساس سختی واجهشی اشمیت، چگالی و تخلخل برای تخمین مقاومت فشاری تک­محوری و مدول الاستیسیته ارائه شده است. روابط ارائه شده بر اساس آزمون­های آماری مورد بررسی قرار گرفتند که نشان دهنده صحت و دقت مناسب آن­ها می­باشد. مقایسه روابط ساده و چند متغیره نشان می­دهد چگالی و تخلخل نقش مهمی در افزایش میزان دقت تخمین مقاومت فشاری تک­محوری و مدول الاستیسیته از سختی واجهشی اشمیت دارند. هم­چنین نتایج دلالت بر این دارد هنگامی که سختی واجهشی اشمیت و چگالی به عنوان پارامتر ورودی رابطه رگرسیون استفاده می­شوند، مقدار ضریب تعیین برای تخمین مقاومت فشاری تک­محوری و مدول الاستیسیته به ترتیب برابر با 88/0 و 83/0 هستند. در حالی که اگر سختی واجهشی اشمیت و تخلخل به عنوان پارامتر ورودی استفاده شوند، مقدار ضریب تعیین برای تخمین مقاومت فشاری تک­محوری و مدول الاستیسیته به ترتیب برابر با 91/0 و 74/0 هستند.}, keywords_fa = {تخلخل,چگالی,سختی واجهشی اشمیت,مدول الاستیسیته,مقاومت فشاری تک محوری}, url = {https://nfag.basu.ac.ir/article_2452.html}, eprint = {https://nfag.basu.ac.ir/article_2452_9fa4bc1958d170c70c13103d2bee961a.pdf} }