@article { author = {Hosseini, M. and Jalalypour, M. and Maleky, S.}, title = {Considering effect of modulus of elasticity and confining pressure on mode-I fracture toughness of chalky specimens}, journal = {New Findings in Applied Geology}, volume = {11}, number = {21}, pages = {92-102}, year = {2017}, publisher = {Bu-Ali Sina University}, issn = {2228-5873}, eissn = {2981-0264}, doi = {10.22084/nfag.2017.1927}, abstract = {There are three notch displacement modes including the Mode I or opening mode where the notch displacement is perpendicular to the notch front, Mode II or shear mode where notch dimensions are displaced in the notch plane and the Mode III or tear mode where the notch dimensions are displaced in the notch plane parallel to the notch front. Some application areas of rock fracture mechanics can be listed as hydraulic fracturing, rock blasting, rock cutting, mechanized drilling, rock slope stability and comminution in mineral processing. The aim of the present study was to examine the effect parameter of , modulus of elasticity and confining pressure on the mode I Critical Stress Intensity Factor (Critical SIF) using a thick-walled hollow cylindrical chalky specimen and the oil well environment was simulated in the laboratory. To perform the tests on artificial chalky specimens, two artificial symmetrical notches with certain dimensions were created in specimens with an outer diameter (OD) of 73 mm, an inner diameter (ID) of 25 mm and a height of 150 mm. A triaxial stress was applied on the specimen and the pressure required for the propagation of the artificial notches was measured. Five tests were conducted to investigate the effect of modulus of elasticity and six tests to investigate the effect of confining pressure on the mode I Critical SIF. By conducting five tests, it was concluded that with increasing modulus of elasticity, mode I Critical SIF increases and with increasing Poisson’s ratio mode I Critical SIF decreases, also, effect of modulus of elasticity on mode I Critical SIF is more. Meanwhile, it was found that the mode I Critical SIF nonlinearly increased with an increase in modulus of elasticity and it linearly increased with an increase in confining pressure.}, keywords = {fracture toughness,mode I,Modulus of elasticity,confining pressure,chalky specimen}, title_fa = {بررسی اثر مدول الاستیسیته و فشار جانبی روی چقرمگی شکست مود I نمونه های گچی}, abstract_fa = {سه مود جابجایی ترک وجود دارد. مود اول یا حالت بازشدگی که سطوح ترک در جهت عمود بر سطح ترک جدا می­شوند. مود دوم یا  حالت برشی که در این حالت جابجایی وجوه ترک در صفحه ترک ولی عمود بر جبـهه ترک می­باشـد و مود سـوم یا حـالت  لغـزش و پاره­شدگی است که در این حالت جابجایی وجوه ترک در صفحه ترک و موازی با جبهه ترک است. برخی کاربردهای مکانیک شکست سنگ در شکست هیدرولیکی، برش و انفجار در سنگ، حفاری مکانیزه، پایداری شیروانی سنگی و  خردایش مواد معدنی است. هدف اصلی این تحقیق بررسی اثر مدول الاستیسیته و فشار جانبی بر روی چقرمگی شکست مود اول استوانه­های توخالی جدار ضخیم گچی می­باشد و چاه نفت در آزمایشگاه شبیه­سازی مـی­شود. برای انجـام آزمایـش روی نمونه­های مصنوعی گچی به قطر خارجی 73 میلی­متر و قطر داخلی 25 میلی­متر و ارتفاع 150 میلی­متر دو ترک مصنوعی با ابعاد مشخص به صورت متقارن ایجاد شد. آنگاه بر روی نمونه­ها تنـش سه­محوری اعمال و فشار لازم برای گسیختگی نمونه­های دارای ترک­های مصنوعی اندازه­گیری شد. پنج آزمایـش سـه­محوری برای بررسـی اثر مدول الاستیسـیته و شـش آزمایـش سه­محوری برای بررسی اثر فشار جانبی بر روی چقرمگی شکست مود اول  انجام گردید. نتایج تحقیق نشان می­دهد چقرمگی شکست با افزایش مدول الاستیسیته و فشار جانبی افزایش می­یابد، هم­چنین تاثیر مدول الاستیسیته روی چقرمگی شکست بیش­تر است. رابطه چقرمگی شکست با مدول الاستیسیته غیر خطی، و رابطه چقرمگی شکست با فشار جانبی خطی است.}, keywords_fa = {چقرمگی شکست,مود I,مدول الاستیسیته,فشار جانبی,نمونه گچی}, url = {https://nfag.basu.ac.ir/article_1927.html}, eprint = {https://nfag.basu.ac.ir/article_1927_4cc04fc0b079b899bfa6bef22331f25b.pdf} }